S+D METALS

+49 4174 66 94-0

info@sd-metals.com

Close up of titanium coils and titanium round bars
 
 

Pure titanium Grade 2 with a good strength/ductility ratio and good corrosion resistance

 

Titanium Grade 2 Data sheet

3.7035 | UNS R50400 | ASTM B265 | ASTM F67 | ASME SB 265 | ISO 5832-2

Commercially pure unalloyed titanium, which offers an excellent balance between strength and ductility. It has good impact strength and is readily weldable. It has good corrosion resistance in highly oxidizing environments, alkaline media, aqueous salt solutions, slightly reducing environments, nitric acid, and wet chlorine gas. It also has excellent resistance to seawater and salt solutions. Titanium’s low density, high strength-to-weight ratio, and resistance to corrosion make it an ideal material for a wide range of applications. Because it is castable, it is often used for cast valves and fittings.

Coils
Sheets
Dimensions from 0.50 x 1250 mm to 3.00 x 1250 mm available in stock
  • 0,50 x 1250,00 mm
  • 0,60 x 1250,00 mm
  • 1,00 x 1250,00 mm
  • 1,50 x 1250,00 mm
  • 2,00 x 1250,00 mm
  • 2,50 x 1250,00 mm
  • 3,00 x 1250,00 mm
  • 4,00 x 1250,00 mm
Sheets
Plates
Dimensions from 5,00 mm to 50,00 mm Diameter available in stock
  • 5,00 mm
  • 6,00 mm
  • 8,00 mm
  • 10,00 mm
  • 12,00 mm
  • 15,00 mm
  • 20,00 mm
  • 25,00 mm
  • 30,00 mm
  • 35,00 mm
  • 40,00 mm
  • 50,00 mm
Galvano
Dimensions from 6,35 x 6,35 mm to 25,40 x 12,70 mm available in stock
  • 6,35 x 6,35 mm
  • 9,50 x 9,50 mm
  • 12,70 x 12,70 mm
  • 15,00 x 15,00 mm
  • 19,05 x 19,05 mm
  • 25,40 x 25,40 mm
  • 12,70 x 6,35 mm
  • 19,05 x 6,35 mm
  • 19,05 x 12,70 mm
  • 25,40 x 6,35 mm
  • 25,40 x 12,70 mm
Round bars
Dimensions from 4,00 mm to 250 mm Diameter available in stock
  • 4,00 mm Ø
  • 5,00 mm Ø
  • 6,00 mm Ø
  • 8,00 mm Ø
  • 10,00 mm Ø
  • 12,00 mm Ø
  • 15,00 mm Ø
  • 16,00 mm Ø
  • 19,00 mm Ø
  • 20,00 mm Ø
  • 25,00 mm Ø
  • 30,00 mm Ø
  • 35,00 mm Ø
  • 40,00 mm Ø
  • 45,00 mm Ø
  • 50,00 mm Ø
  • 55,00 mm Ø
  • 60,00 mm Ø
  • 65,00 mm Ø
  • 70,00 mm Ø
  • 75,00 mm Ø
  • 80,00 mm Ø
  • 85,00 mm Ø
  • 90,00 mm Ø
  • 95,00 mm Ø
  • 100,00 mm Ø
  • 110,00 mm Ø
  • 120,00 mm Ø
  • 130,00 mm Ø
  • 150,00 mm Ø
  • 180,00 mm Ø
  • 190,00 mm Ø
  • 200,00 mm Ø
  • 250,00 mm Ø
Hexagon bars
Dimensions from SW 10 mm to SW 19 mm available in stock
  • SW 10 mm
  • SW 13 mm
  • SW 17 mm
  • SW 19 mm

Areas of application for Titanium Grade 2 | ASTM B348

Corrosion resistance in chemical and maritime industries, plate heat exchangers, reaction vessels, evaporators, condensers, electroplating equipment, desalinization plants and seawater heaters, medical equipment, and structural engineering.

 

Characteristics Titanium Grade 2 | ASTM B348

Chemical composition - limits in % (ASTM B265 + ASTM B348)

Ti Rest
Fe max. 0,30
C max. 0,08
O max. 0,25
N max. 0,03
H max. 0,015

Physical constants and thermal properties

Density 4,51g/cm²
Melting point 1670°C
Beta transus temperature 920 ± 4°C
Thermal conductivity at 20°C 16 W/ m°C

Typical mechanical properties for ASTM B265

Yield strength min. 275, max. 450 MPa
Tensile strength min. 345 MPa
Elongation min. 20%

Typical mechanical properties for ASTM B348

Yield strength min. 275 MPa
Tensile strength min. 345 MPa
Elongation min. 20%

All information is subject to change without notice. The properties correspond to the material in the heading. They may vary for other specifications. Please contact us for more details.

 

Material cutting:

S+D METALS is more than just a stockist. Save time and a processing step by letting S+D METALS cut your coils, sheets, plates, and round bars to size according to your specifications in S+D METALS own machine park or by one of our capable partners. All this within the shortest time possible.

More details can be found here

Your contact

Olaf Hölscher

Olaf Hölscher
Product Manager Pure Titanium | Industry | Bars, Cold-Rolled Sheets + Strips
+49 211 230 999-22
o.hoelscher@sd-metals.com

Bahar Lülsdorf

Bahar Lülsdorf
Product Manager Pure Titanium | Industry | Hot-Rolled Sheets + Plates + Blanks | Marketing Manager
+49 211 230999-14
b.luelsdorf@sd-metals.com

Dorothea Röhrig

Dorothea Röhrig
Product Manager Surface Treatment
+49 211 230 999-20
d.roehrig@sd-metals.com

Dirk Verhoeven

Dirk Verhoeven
Senior Product Manager Medical Technology
+49 211 230 999-10
d.verhoeven@sd-metals.com