S+D METALS

+49 4174 66 94-0

info@sd-metals.com

Titanium tubes bundled in stock
 
 

Oxidation-resistant, corrosion-resistant, very good cold formability, excellent fatigue properties for thinner wall thicknesses, and weight savings

 

Titanium KSTI-1,2 ASNEX Data sheet

Titan KSTI-1,2 ASNEX, oxidation-resistant, corrosion-resistant, very good cold formability

KSTI-1,2 ASNEX was developed for high performance automotive and motorcycle exhaust systems and is based on pure titanium that is stabilized using aluminum, silicon and niobium additives. This pure titanium-based grade features excellent fatigue properties and high oxidation resistance at temperatures up to 700-800°C. The higher oxidation resistance enables the use of thinner walls, which saves additional weight and increases the longevity of the system. KSTI-1,2 ASNEX can thus offer a decisive competitive advantage in motorsports.

Product forms for KSTI-1,2 ASNEX

Coils
Sheets
Dimensions from 0,70 x 1000,00 mm to 3,00 x 1250,00 mm available in stock
  • 0,70 x 1000,00 mm
  • 0,80 x 1250,00 mm
  • 0,90 x 1250,00 mm
  • 1,00 x 1250,00 mm
  • 1,20 x 1250,00 mm
  • 1,50 x 1250,00 mm
  • 2,00 x 1250,00 mm
  • 3,00 x 1250,00 mm
Tubes
Diameter from 19,05 mm to 101,60 in wall thicknesses from 1,00 mm to 2,00 mm available from stock
  • 19,05 x 1,00 mm
  • 19,05 x 1,20 mm
  • 30,00 x 1,20 mm
  • 30,00 x 1,50 mm
  • 35,00 x 1,00 mm
  • 38,00 x 1,20 mm
  • 40,00 x 1,20 mm
  • 40,00 x 1,50 mm
  • 45,00 x 1,00 mm
  • 45,00 x 1,20 mm
  • 48,00 x 1,00 mm
  • 50,00 x 1,00 mm
  • 50,00 x 1,20 mm
  • 52,00 x 1,00 mm
  • 54,00 x 1,20 mm
  • 55,00 x 1,00 mm
  • 60,00 x 1,00 mm
  • 60,00 x 1,20 mm
  • 63,50 x 1,20 mm
  • 65,00 x 1,00 mm
  • 65,00 x 1,20 mm
  • 70,00 x 1,00 mm
  • 70,00 x 1,20 mm
  • 70,00 x 1,50 mm
  • 76,10 x 1,00 mm
  • 76,10 x 1,20 mm
  • 76,10 x 1,50 mm
  • 80,00 x 1,00 mm
  • 80,00 x 1,20 mm
  • 80,00 x 1,50 mm
  • 80,00 x 2,00 mm
  • 88,90 x 1,20 mm
  • 101,60 x 1,20 mm
Titanium wire
Diameter from 1,00 mm to 3,00 mm available from stock
  • 1,00 mm
  • 1,20 mm
  • 3,00 mm

Areas of application for KSTI-1,2 ASNEX

Exhaust systems for automobiles and motorcycles

 

Characteristics KSTI-1,2 ASNEX

Chemical composition - limits in %

Al 0,30 - 0,70
Si 0,30 - 0,60
Nb 0,10 - 0,30
Fe max. 0,20
O max. 0,15
C max. 0,08
N max. 0,05
H max. 0,013

Typical mechanical properties (from coil at room temperature) longitudinal section

0,2% Compressive strength min. 320 MPa
Tensile strength min. 438 MPa
Elongation min. 33%

Typical mechanical properties (from coil at room temperature) landscape format

0,2% Compressive strength min. 396 MPa
Tensile strength min. 439 MPa
Elongation min. 40%

Typical mechanical properties (from coil at room temperature) specification

0,2% Compressive strength min. 215 MPa
Tensile strength min. 340 MPa
Elongation min. 20%

All information is subject to change without notice. The properties correspond to the material in the heading. They may vary for other specifications. Please contact us for more details.

 

Service

PDF Download

Material cutting:

S+D METALS is more than just a stockist. Save time and a processing step by letting S+D METALS cut your coils, sheets, plates, and round bars to size according to your specifications in S+D METALS own machine park or by one of our capable partners. All this within the shortest time possible.

More details can be found here

Your contact

Andreas Conraths

Andreas Conraths
Product Manager Automotive + Motorbike
+49 211 230 999-16
a.conraths@sd-metals.com

Olaf Hölscher

Olaf Hölscher
Product Manager Pure Titanium | Industry | Bars, Cold-Rolled Sheets + Strips
+49 211 230 999-22
o.hoelscher@sd-metals.com