PH 13-8 Mo | 1.4534 - Data sheet
1.4534.9 | UNS S13800 | AMS 5629
PH 13-8 Mo is a stainless steel with approximately 13% chromium and 8% nickel content that has good resistance to corrosion in general as well as to stress corrosion cracking. PH 13-8 Mo offers better mechanical properties in demanding environmental conditions in comparison to other materials based on iron. Precise control of the microstructure is achieved through vacuum melting and remelting. Medium to high strength can be achieved through precipitation hardening aging treatments.
Product forms for PH 13-8 Mo | 1.4534
- 10,00 mm Ø
- 12,00 mm Ø
- 16,00 mm Ø
- 20,00 mm Ø
- 25,00 mm Ø
- 30,00 mm Ø
- 32,00 mm Ø
- 35,00 mm Ø
- 40,00 mm Ø
- 50,00 mm Ø
- 60,00 mm Ø
- 70,00 mm Ø
- 80,00 mm Ø
- 90,00 mm Ø
- 100,00 mm Ø
- 120,00 mm Ø
- 140,00 mm Ø
Areas of application for PH 13-8 Mo | 1.4534
Airframe structural components, water jet cutting equipment, injection molding equipment, motorsport components, fasteners, valves and fittings.
Characteristics PH 13-8 Mo | 1.4534
Chemical composition - limits in %
Fe | Rest |
Cr | 12,25 - 13,25 |
Ni | 7,50 - 8,50 |
Mo | 2,00 - 2,50 |
Al | 0,90 - 1,35 |
Mn | max. 0,20 |
N | max. 0,10 |
Si | max. 0,10 |
C | max. 0,05 |
P | max. 0,01 |
Physical constants and thermal properties
Density | 7,76 g/cm³ |
Melting point | 1404 °C |
Thermal conductivity at 20°C | 12,8 W/m · °C |
Elongation coefficient at 20-100°C |
13 μm/m · °C |
Typical mechanical properties (room temperature)
H950 | |
Yield strength | min. 1413 MPa |
Tensile strength | min. 1517 MPa |
Elongation | min. 10 % |
H1000 | |
Yield strength | min. 1310 MPa |
Tensile strength | min. 1413 MPa |
Elongation | min. 10 % |
H1050 | |
Yield strength | min. 1138 MPa |
Tensile strength | min. 1207 MPa |
Elongation | min. 12 % |
All information is subject to change without notice. The properties correspond to the material in the heading. They may vary for other specifications. Please contact us for more details.
Service
PDF Download
Material cutting:
S+D METALS is more than just a stockist. Save time and a processing step by letting S+D METALS cut your coils, sheets, plates, and round bars to size according to your specifications in S+D METALS own machine park or by one of our capable partners. All this within the shortest time possible.
More details can be found here
Your contact
Michael Brackenwagen
Sales Director | Senior Product Manager Special Stainless Steel | Aerospace + Aviation + Industry
+49 4174 66 94-116
m.brackenwagen@sd-metals.com
Veronika Droßbach
Product Manager Special Stainless Steel | Aerospace + Aviation + Industry
+49 4174 66 94-117
v.drossbach@sd-metals.com