S+D METALS

+49 4174 66 94-0

info@sd-metals.com

Nickel Alloy 36 plate, 19.05 mm thick
 
 

Nickel Alloy 36 is ideal for precision components and applications with critical dimensional stability

 

ALLOY 36 | 1.3912 - Data sheet

UNS K93600 | ASTM F1684 | SEW 385 | DIN 17745

Alloy 36 is a binary nickel-iron alloy with 36% nickel that is known for its low coefficient of expansion.  It has a very low thermal expansion coefficient at room temperature and minimal variation at cryogenic temperatures, making it ideal for use in precision components. It is also used in applications where dimensional stability is critical such as in tools for the production of composite materials used in aerospace and automotive applications.

Product forms for ALLOY 36 | 1.3912

Round bars
Dimensions from 6 mm to 130 mm Diameter available in stock
  • 6,00 mm Ø
  • 8,00 mm Ø
  • 10,00 mm Ø
  • 12,00 mm Ø
  • 16,00 mm Ø
  • 20,00 mm Ø
  • 25,00 mm Ø
  • 30,00 mm Ø
  • 35,00 mm Ø
  • 40,00 mm Ø
  • 45,00 mm Ø
  • 50,00 mm Ø
  • 60,00 mm Ø
  • 70,00 mm Ø
  • 80,00 mm Ø
  • 100,00 mm Ø
  • 120,00 mm Ø
  • 130,00 mm Ø
Plates
Dimensions from 6,35 to 100 mm Thickness available in stock
  • 6,35 mm
  • 10,00 mm
  • 12,70 mm
  • 15,88 mm
  • 19,05 mm
  • 25,40 mm
  • 30,00 mm
  • 40,00 mm
  • 45,00 mm
  • 50,00 mm
  • 60,00 mm
  • 80,00 mm
  • 100,00 mm

Areas of application for ALLOY 36 | 1.3912

Tools for composite materials used in aerospace applications, length and measurement gauges, thermostat rods, and laser components.

 

Characteristics ALLOY 36 | 1.3912

Chemical composition - limits in %

Ni 35,00 - 38,00
Co max. 1,00
Mn max. 0,60
Cr max. 0,50
Mo max. 0,50
Si max. 0,35
C max. 0,10
P max. 0,025
S max. 0,025
Fe Rest

Physical constants and thermal properties

Density 8,11 g/cm³
Melting point 1430 °C
Thermal conductivity 10,0 W/m · °C

Typical mechanical properties (annealed)

Yield strength min. 240 MPa
Tensile strength min. 490 MPa
Elongation min. 42%

Thermal Expansion Properties

Temperature range (°C) Mid-linear coefficient (µm/m · °C)
-200 - 20 1,5
-100 - 20 1,3
20 - 100 1,5
20 - 200 2,6
20 - 300 5,5
20 - 400 8,4
20 - 500 10,1

All information is subject to change without notice. The properties correspond to the material in the heading. They may vary for other specifications. Please contact us for more details.

 

Service

PDF Download

Material cutting:

S+D METALS is more than just a stockist. Save time and a processing step by letting S+D METALS cut your coils, sheets, plates, and round bars to size according to your specifications in S+D METALS own machine park or by one of our capable partners. All this within the shortest time possible.

More details can be found here

Your contact

Julius Mönkeberg

Julius Mönkeberg
Product Manager Nickel and Cobalt Alloys
+49 4174 66 94-118
j.moenkeberg@sd-metals.com

Jacob Schmidt

Jacob Schmidt
Sales Nickel and Cobalt Alloys
+49 4174 66 94-217
j.schmidt@sd-metals.com